Setup
Document No. D109-010
Page 46 of 108
Revision 1.15
Figure 3.42. - Selecting Download
Once complete, the user will be notified that the download was successful.
Figure 3.43. - Successful download
During the download process the module’s time will be compared to that of the PC’s time.
Should the difference be greater than 30 seconds, the user will be prompted to set the
module time to that of the PC time.
Figure 3.44. – Setting module time
NOTE: When in Reactive (Outstation) mode the time is not synchronized to
that of the PC. The DNP3 Master will be responsible for correcting the time on
the DNP3 Router (Outstation).
The module time is used only for the event log.
