Setup
Document No. D109-010
Page 31 of 108
Revision 1.15
Figure 3.23. - Target Browser selection
The required Logix controller can then be chosen by selecting it and clicking the Ok button, or
by double-clicking on the controller module.
A maximum number of 3 controller mapping entries can be added.
The second part of the Reactive Tag mode is to configure the link between a DNP3 group,
variation, and range combination to a Logix tag. This will allow the DNP3 message initiator to
effectively write to, or read from, a Logix tag using traditional DNP3 functions (e.g.
Select/Operate).
