Apach BAKERY Line ST A 20, Use And Maintenance Manual, Page: 24 / 33

24
EN
5.1
TRANSPORT
The machine must be transported in its original packaging. It must be
moved with an adequate lifting system to avoid damaging it and
injuring yourself.
 Do not position anything on the package.

The machine must always be transported in a vertical position.
5.2
UNPACKING
The machine can be sent packaged with a pallet and cardboard, cage or
crate.
The packaged machine can therefore by lifted
with a forklift or pallet truck by inserting the
forks in the specific spaces prepared under the
packaging. It can also be lifted with a crane,
passing the ropes or straps under the packaging.
In this case, comply with the maximum
tensioning angle of the ropes which must be 45°,
as shown in the figure.
Remove the packaging vertically. Carefully unpack the machine
and check there are no signs of damage from transport. If found,
promptly inform the carrier. You are always advised to
photograph the damage. Remove the fastening brackets as in the
figure and, using a forklift (or a lifting device), remove the
machine from the pallet. To ensure further staff safety, you
are advised to maintain a sufficient distance from the machine
when it is being lifted.
5
- TRANSPORT
AND
UNP
ACK
ING
THE
MACHINE