Apach BAKERY Line L 120, Instruction And Maintenance Manual, Page: 90 / 126

90
EN
ADJUSTMENT OF THE BOWL FRICTION WHEELS
The central bowl guide assembly is composed of one bowl friction wheel. Its position has been perfectly adjusted
during the machine assembly and testing phases.
However, should it be necessary to adjust the position of the bowl friction wheel on the bowl rim, proceed in the following
manner:
-
with the machine head completely open, remove the side panel on the machine, to gain access to the thrust roller
assembly;
-
loosen the fastening screw on the upper support of the bowl friction wheel shaft;
-
loosen the fastening screw on the lower support of the bowl friction wheel shaft;
-
move the bowl friction wheel forwards or backwards, as required, by using the upper and lower adjustment screws
which move the relative supports;
-
fasten the upper and lower screw of the corresponding upper and lower support.
Bowl
friction
wheel shaft
Bowl
friction
wheel
Adjustment
screw for
lower
support
Upper
shaft
support
Lower
shaft
support
Fastening screw
for upper shaft
support
Fastening screw
for lower shaft
support
Adjustment
screw for
upper
support