12
6.7 Error search/troubleshooting
7. Maintenance and care
7.1 Cleaning
7.2 Storage
7.3 Maintenance
8. Notes regarding environmental protection
9. Contact information
Problem
Cause
Remedy
Acoustic warning signal
Display screen:
OUTPUT LOCKED
Connected pole callipers switched
short circuit
Connect pole callipers correctly,
remove contact between the pole callipers
No jump-start possible
1. Pole calliper or cable is defective
2. Internal battery is weak
3. Internal components are defective
1. Repair or replace pole calliper or cable
2. Fully charge power pack
3. Contact the dealer. Repairs may only be carried out
by a specialist workshop.
Flashing display
message:
OUTPUT LOCKED
More than three jump-start attempts
were made with too short a break
The internal battery of the power pack is overheated.
Let the power pack cool down. Only then can you start
a new jump-start attempt.
No display message
1. The USB or 12V output is overloa-
ded and the short-circuit protection
has tripped.
2. Weak battery
1. Push the ON switch
2. Fully charge power pack
Only clean the lithium power pack with a soft cloth and do not use any aggressive cleaning agents or solvents. Never allow
liquids to get into the housing.
Charge the power pack every three months when not in use.
Do not dispose of electrical devices with household waste. Electrical devices and electronic scrap must be collected
separately and disposed of in an environmentally responsible manner for recycling. Please contact your community
or city administration regarding disposal options for electrical and electronic scrap.
The materials are recyclable. You make an important contribution to protecting our environment by recycling,
material utilisation or other forms of reusing waste equipment.
EAL GmbH / Otto-Hausmann-Ring 107 / 42115 Wuppertal / Germany
Telephone: +49 (0)202 42 92 83 0 / Telefax: +49 (0)202 42 92 83 160
Website: www.eal-vertrieb.com / E-Mail: [email protected]
When not in use, store the lithium power pack in a dry place. Do not expose the power pack to moisture, oil, dust, dirt, high
temperatures, strong vibrations, or mechanical load. Always store the power pack with the jump lead unplugged, to prevent
short circuits between the cable callipers.
