1 6
user mode while keeping pressed the Select button. Making the same actions again allows to send the Fire
signal to CMS in the Fire mode.
Disablement of the Fire output signal is indicated by the yellow Disabled indicator and the Fire output
indicator from the Disabled group.
7.6.6 Disablement of Fault output signal
Disablement of the Fault output signal («
Fault
») occurs automatically when the fault has been
eliminated or after the fault mode has been reset. For temporal disablement of the signal the [
3]
button
should be pressed in the authorized user mode while keeping pressed the Select button. Making the same
actions again allows to report the Fault signal to CMS in the Fault mode.
Disablement of the Fault output signal is indicated by the Disabled yellow indicator continuous light and
the Fault output indicator’s continuous light from the Disabled group.
7.6.7 Testing light indicators and internal sounder
To check all LEDs and internal sounder for proper operation press the Select button thrice. After that all
LEDs shall flash 3 times and the internal buzzer shall sound. Verification is possible both on the 2
nd
access
level (in the authorized user mode) and on the 1
st
access level (before entering user’s code).
