11-2 Wireless remote controller
Note!
Match all ARC series (except ARC400-3T, ARC1000/1250), also TIG series (except TIG1000/1250) when on
non-HF
arc strike mode!
The wireless remote controller adopts MCU controller to modulate given signal. Signal is transferred to welding
machine by welding cable, then modulated and turned into given signal. It needs no external wire comparing with
wire remote controller, and easy to use. One controller can control all welding machines with remote receive
board.
The wireless remote controller has two parts: remote control part and receive board. The receiving board is inside
of welding machine; the remote control part is designed as portable cassette, which is convenient for operators to
carry. It is mainly equipped with ARC / TIG series welding machine, it is used to adjust parameters continuously,
such as welding current, arc force current.
Features are as follows:
Wireless control, reducing the failure rate, reduced maintenance costs;
Digital display, accurate display, convenient to set up parameter;
Magnetic bottom design, easy to attach on welding base plate, which can prevent falling and is convenient for
operating;
-
-
-
-
-
-
Long distance control is up to 100m, operator can adjust the welding current and arc force current remotely;
Two methods to adjust, fast adjustment /slow adjustment;
Compact design can be effective anti-raining, light weight, easy to carry.
Parameter adjustment button
Fig. 11-2-1. Wireless remote controller
1
.
Current digital displayer
Indicate welding current when adjust welding current
The initial display is welding current
2.Welding current increasing button
Hold the button will increase welding current at a faster pace
3. Welding current decreasing button
4. Arc force current increasing button
Hold the button will increase the arc force current at a faster pace
5.Arc force current decreasing button
6. Clamp
Used to connect with conductive part of electrode holder.
-
-
-
-
-
-
-
-
-
-
-
Indicate arc force current when adjust arc force current
Press the button to increase welding current value
Press the button to decrease welding current value
Hold the button will decrease welding current at a faster pace
Press the button to increase arc force current value
Press the button to decrease arc force current value
Hold the button will decrease the arc force current at a faster pace
ARC FO RCE
WELDING CU RRENT
WIRELESS REMO TE CO NTROLLER
1
2
3
4
5
6
Receive
Board
76
