QC-6601P Rev 1.0 Page 33
Mounting Guide
To install the unit:
Remove the angle clamping brackets from the cabinet.
Push unit through the aperture from the outside until the front panel is hard against the wall.
Re-bolt the clamping brackets loosely to the cabinet.
Push the clamping brackets up against the wall and tighten the bolts on the cabinet to lock it
into place.
The forward facing bolts on the clamping brackets can be adjusted for extra tension.
Plug power cord into power supply, switch on and the unit is installed.
Wall thickness 100mm – 200mm
Front Panel
Rear door
Clamping Bracket
Locking Bolts
