QC-6601P Rev 1.0 Page 17
Network Configuration
If the Automatically Configure Network checkbox is ticked, DHCP is enabled and the on-site router
will automatically assign network parameters at startup. Should you want to assign static network
parameters to the machine, untick the Automatically Configure Network checkbox, enter the desired
values and then click the Apply Changes button at the bottom of the page.
The MAC Address is set factory set and cannot be altered by a user or administrator.
System Updates
The System Update Server Address determines the location that the QC-6711P will query in order to
download online software updates. This is preset by Anztec but can be changed by the user if the server
address changes.
If email reports or alerts are enabled, details of a valid SMTP mail server must be entered into this
section. Current versions of software do not support SMTP servers that use SSL to encrypt their
communications. This feature will be added at some time in the future.
Time Server
The system can get its current time by either having it manually set or by retrieving it from a time
server. To have the clock automatically set at startup, check the Use Time Server box and enter a time
server address. Select a time zone and check the Daylight Saving box if required.
Click on the Apply Changes button to implement any changes you have made.
Pushover
To receive Pushover notifications from the Anztec Wash Management System you must obtain a
User Identifier Code and an Application API Token from Pushover,
www.pushover.net
.
To obtain the User Identifier code you install the Pushover app on your device as detailed in the
information contained on the Pushover website. There is a seven day free trial period however long
term use requires purchasing the application.
You also need to register the Wash Management System at Pushover to obtain an Application API
Token, registration is free.
Once you have the API token, enter this value into the Pushover API Token box and tick the Enable
Pushover Service checkbox to obtain notifications. It will also be necessary to enter individual or
group pushover IDs into settings on the Configuration->Pushover page.
Click on the Apply Changes button to implement any changes you have made.
You can send a test Pushover by pressing the Pushover Test button.
