Anywire B2G78-E1, User Manual

Page: 29 / 62

Software functions
7-2
Modbus/TCP
Occu-
pied
[Word]
Type Items
Function
code
Memory address Offset address
Start
address
End address
Start
address
End address
04/-- 31468 31470 1467 1469 3 word
Error/alarm history No.128 year, month,
day, time
04/-- 31471 31471 1470 1470 1 word
Error/alarm history No.128 target ID
04/-- 31472 31472 1471 1471 1 word Error/alarm history No.128 error code
04/-- 31473 31890 1472 1889 418 word
System reserved
04/-- 31891 35730 1890 5729 3840 word
R/O parameter storage area (30x128)
04/-- 35731 39871 5730 9870 4141 word
System reserved
04/-- 39872 39872 9871 9871 1 word
Registration ID number
04/-- 39873 40000 9872 9999 128 word
Registration ID
* When using Modbus/TCP communication, the actual specified start address is the offset address.
7.1.1.1 Input memory map details
The AnyWireASLINK input signal is stored in this memory map.
When the input signal is specified with Modbus/TCP function code 02 (input reading), the corresponding
memory addresses are 0~255 (bit type), and when the input signal is specified with function code 04 (input
register reading), the corresponding memory addresses are 0~15 (word type).
Since the only difference is the data type, please choose according to your particular application.
<Function code 02 (input reading)>
Modbus/TCP address Corresponding bit/input
address Memory address Offset address
10001 0 0
10002 1 1
10003 2 2
10004 3 3
￤ ￤
10255 254 254
10256 255 255
<Function code 04 (input register reading)>
Modbus/TCP address Corresponding bit/input address
Memory
address Offset
address
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
30001 0 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
30002 1 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
30003 2 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32
30004 3 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48
￤ ￤
30015 14 239 238 237 236 235 234 233 232 231 230 229 228 227 226 225 224
30016 15 255 254 253 252 251 250 249 248 247 246 245 244 243 242 241 240
This indicates the
state (ON/OFF) of
the 0 bit input signal
of the input unit set
to address 2.
This indicates the
state (ON/OFF) of
the 0 bit input signal
of the input unit set
to address 2.