Anywave PA-VIII1-C-FA, User Manual

Page: 6 / 27

PA-U01-C-FA User Manual
ACT-PAVIII1-USR-DOC-V1.0, 06/25/2018 Page 6 of 27
1 Product Appearance
1.1 Front Panel

LAN

Connector: 10M/100M Ethernet

Note: Ethernet port for web-based remote
control
(ipaddress: 192.168.1.210, username/password: anywavecom/anywavecom)

LED_PWR

Green light will be on when the DC voltage of internal power supply is within the normal range
(48 VDC ~ 52 VDC).

Green light will flash when the DC voltage of internal power supply is out of the normal range
(48 VDC ~ 52 VDC).

Green light will be off when the external power supply is turned off, or internal power supply
module does not work.

LED_RS485

Green light will flash once per second when the internal communication is normal.

Green light will stay constantly on or off when the internal communication is abnormal.

LED_FWD

Blue light will be on when RF_OUT has power output.

Blue light will be off when the RF button is turned off, or the PA enters the auto-protection mode
and therefore shuts down its RF output. There are several situations which will result in
auto-protection mode, such as the input power is too high, the reflected power is too high, or the
temperature is too high.

LED_ALARM

Red light will be off if there is no alarm.

Red light will be on if there is any alarm.

RESET: reserved.