Anywave PA-VIII1-C-FA, User Manual

Page: 20 / 27

PA-U01-C-FA User Manual
ACT-PAVIII1-USR-DOC-V1.0, 06/25/2018 Page 20 of 27
3.3.3. Config Screen
Touching the Config button on theTitle Bar of the Home Screen, will navigate to the Config Screen, as
shown below. The Config Screen has two functional sections on the right. Press any of these buttons to
navigate to that config screen. The Network screen is used to configure all the TX networking parameters
including IP, Mask, and Gateway. The Time screen is used to set the current time. The AGC screen is used
to turn the PA AGC On/Off and to change the target AGC output power level.