Anywave PA-VIII1-C-FA, User Manual

Page: 16 / 27

PA-U01-C-FA User Manual
ACT-PAVIII1-USR-DOC-V1.0, 06/25/2018 Page 16 of 27
The home screen is divided into 4 parts: Title Bar (left column), Power Metering (upper right), Block
Diagram (middle right) and Status Bar (lower right), as shown below.

Title Bar : Shown in the picture above, the “Home” button is highlighted, indicating the Home screen
is now displayed. This screen is a touch screen. You may navigate to the other screens (Config, Status,
Help) by simply touching the coresponding button in the Title Bar.

Power Metering

ON/OFF (Green) Button : Provides TX ON/OFF control. When GREEN (as shown above), this
indicates the TX is ON. When RED, this indicates the TX is OFF.

FWD: Forward Power Meter. Touching the white display box of FWD will toggle its display
units between “dBm” and “W”.

REFL: Reflected Power Meter. Touching the white display box of REFL will toggle its display
units between “dBm” and “W”.

VSWR: Voltage Standing Wave Ratio

Status Bar : During normal operation, the default status is “RUNNING OK”. If there is any alarm, the
alarm will show up in the Status Bar of each screen.

Block Diagram : Press the “Exc A/B” graphic to navigate to the Dual Exciters Switching screen
(shown below). This screen shows which exciter is currently on-air (highlighted GREEN) and allows
the user to manually change the on-air exciter.