Anywave PA-VIII1-C-FA, User Manual

Page: 10 / 27

PA-U01-C-FA User Manual
ACT-PAVIII1-USR-DOC-V1.0, 06/25/2018 Page 10 of 27
3 Control Interface
3.1 Local (Exciter) Interface
Local control and monitoring of the PA unit can be accomplished via the ACT-5X Exciter front panel user
interface. Use a standard serial cable to connect the PA D9 RS232-A port to the ACT-5X Exciter D9
REMOTE (RS232) port. With this connection established, all the PA information will be displayed in the
PAC sub-menu in the advanced menu of ACT-5X exciter, as shown below:
Note: The displayed settings and numbers in the tables below are for illustration purposes only and may be
different from those in actual use.
A second sub-menu is available for configuring the PA networking settings. Enter the main menu of
ACT-5X exciter and locate the PA_CNFG sub-menu to setup the IP, GATEWAY and MASK PA
networking parameters.