49
ADVANCED FUNCTION OPERATIONS
Display Mode Setup
There are three kinds of display (user) modes.
Press [PF2] key as you turn on the radio, continue holding the [PF2] key until the
1.
transceiver emits a beep.
Press
2.
/
key to choose No.01 function item, it shows "
DSP
" on LCD.
Rotate channel switch to choose desired setup.
3.
FREQ:
FrChannel mode, transceiver displays current channel number
+ frequency, press
key to switch into VFO mode.
CH:
Channel mode (for commercial use), 1~24 items of function menu will be
disabled, the user can only operate some functions. The VFO Mode is
disabled. With this mode, radio can be used as commercial radio.
NAME:
Name Tag mode, transceiver displays current channel number
+channel name, press
key to switch into VFO mode.
Press
4.
key or
key to confirm and exit.
Resume Factory Default
You can make all the settings of transceiver return back to the factory default settings when the transceiver
does not work normally (possible due to bad settings)
Summary of Contents for THE OBLITERATOR OBLTR-8R
Page 2: ...USER S MANUAL...
Page 3: ......
Page 20: ...10 GETTING ACQUAINTED DCIN MIC SP 1 3 4 8 9 10 2 5 6 7 11 12 13 14 BANK BAND...
Page 73: ...63 TECHNICAL SPECIFICATION...
