27
FUNCTION MENU SETUP
Note: User-defined CTCSS decode must be setup by programming software.
choose DCS positive or inverse code.
4. Rotate channel selector knob to choose desired CTCSS/DCS code.
CTCSS:
62.5HZ~254.1HZ,51 groups in total, and 1 group user-defined code.
DCS:
000N-777I, 1024 groups in total. "
N
" stands for positive code, "
I
" stands
for inverse code.
5. Press
or
key to confirm and exit.
This function is for adjusting CTCSS/DCSencode/decode synchronous.(simultaneous changes Menu NO
01 and 02).
1. Press
key, the top left corner of LCD displays " " icon, then press
key to enter into function
menu.
2. Press
/
key to choose NO. 03 function item, it shows "
RT-CDC
" on LCD.
3. Press
key to choose CTCSS, DCS or OFF, when DCS signaling is selected, press
key to
choose DCS positive or inverse code.
4. Rotate channel selector knob to choose desired CTCSS/DCSencode/decode.
CTCSS:
62.5HZ~254.1HZ, 51groups in total, and 1 group user-defined code.
DCS:
000N-777I, 1024 groups in total. "
N
" stands for positive code, "
I
" stands for inverse code.
5. Press
or
key to confirm and exit.
CTCSS/DCS Encode/Decode Synchronous Setup
Summary of Contents for THE OBLITERATOR OBLTR-8R
Page 2: ...USER S MANUAL...
Page 3: ......
Page 20: ...10 GETTING ACQUAINTED DCIN MIC SP 1 3 4 8 9 10 2 5 6 7 11 12 13 14 BANK BAND...
Page 73: ...63 TECHNICAL SPECIFICATION...
