18
BASIC OPERATIONS
While your radio is in standby, Press the
1.
key, the top left corner of LCD will display the " " icon,
then press the
key to enter the manual channel programming mode, the channel number will begin
flashing.
Rotate the channel knob until the Channel number displays the channel you would like to remove.
2.
Press the
3.
key, the top left corner of LCD displays the " " icon, and hold the
key until the
transceiver emits a confirmation beep. Your channel has been successfully deleted.
Delete a channel
Add a channel
Under frequency mode (VFO), after you have set up your desired frequency and settings (read through
1.
the Function Menu Setup in order to understand how to set your desired frequency settings), Press the
key, the top left corner of LCD will display the " " icon, then press the
key to enter the
manual channel programming mode, the channel number will begin flashing.
Rotate the channel knob until the Channel number displays the channel you would like to.
2.
Press the
3.
key, the top left corner of LCD displays the " " icon, and hold the
key until the
transceiver emits the confirmation beep. Your new channel has been programmed successfully.
Note : This process can be used for FM radio channels as well.
Summary of Contents for THE OBLITERATOR OBLTR-8R
Page 2: ...USER S MANUAL...
Page 3: ......
Page 20: ...10 GETTING ACQUAINTED DCIN MIC SP 1 3 4 8 9 10 2 5 6 7 11 12 13 14 BANK BAND...
Page 73: ...63 TECHNICAL SPECIFICATION...
