33
FUNCTION MENU SETUP
Frequency Reverse
1. Press
key, the top left corner of LCD displays " " icon, then press
key enter into function menu.
2. Press
/
key to choose NO.11(OBLTR-8R)/NO.12(TERMN-8R) function
item, it shows "
REV
" on LCD.
3. Rotate channel selector knob to choose desired setup.
ON:
Turn on Frequency reverse function, TX and RX frequency of current
channel will be interchanged. If CTCSS/DCS signaling is set, it also will
be interchanged.
OFF:
Close Frequency reverse function.
4. Press
key or
key to confirm and exit.
Talk Around ON/OFF
When this function is is turned on, the transceiver will stop communication with a
repeater (it will remove the Offset).
1. Press
key, the top left corner of LCD displays " " icon, then press
key enter into function menu.
2. Press
/
key to choose NO.12(OBLTR-8R)/NO.13(TERMN-8R) function
item, it shows "
TALKAR
" on LCD.
3. Rotate channel selector knob to choose desired setup.
TX=RX:
Turn on Talk Around function, current channel will transmit at RX frequency, if CTCSS/DCS
signaling is set, it will interchange decoding CTCSS/DCS as encoding.
Summary of Contents for THE OBLITERATOR OBLTR-8R
Page 2: ...USER S MANUAL...
Page 3: ......
Page 20: ...10 GETTING ACQUAINTED DCIN MIC SP 1 3 4 8 9 10 2 5 6 7 11 12 13 14 BANK BAND...
Page 73: ...63 TECHNICAL SPECIFICATION...
