AnyTone THE OBLITERATOR OBLTR-8R, User Manual

Page: 23 / 84

13
BASIC OPERATIONS
NOTE:When the transceiver is in channel mode the right side of the frequency will display the channel (or
memory bank) number.
Channel Adjusting
Input channel number by scrolling
1.
Rotate the channel switch clockwise to increase the channel number, or rotate it counterclockwise to
decrease the channel number. If there is a blank channel between two channels, the radio will automatically
skip the blank channel and go onto the next channel.
When the transceiver is in Channel mode the user can input any number to switch to the desired channel.
If the channel number entered is an un-programmed channel, the radio will audibly let you know an empty
channel has been selected and return to the previously tuned channel.
Input channel number by keypad
2.
Switch between Channel mode and VFO mode
While in standby, press key to set the selected band into channel mode or
frequency mode(VFO).