FP Verify
ID 008101
Workcode
000000
Click the button [OK] to confirm.
Real-time monitor function: Real-time monitor function is only for the TCP\IP
communication method.
Ring function: Enable is function before using the Ring time settings.
Wiegand Mode: Wiegand26, Anviz wiegand. Default is Wiegand 26.
Fixed wiegand area code (0~254): If you upload one card to two terminals, the
same card’s wiegand outputs are different in the different terminals. If the two terminals’
wiegand area codes are same, the same card’s wiegand outputs are same in these two
terminals.
Lock Relay time (0~15seconds): The door open delay.
Click the button [OK] to save the settings. Following message box pops up:
Click the button [OK] to confirm or click the button [Cancel] to cancel.
The operation information in the main interface is as follows:
[2009-03-18 15:05:08]Set Advanced Parameter...
[2009-03-18 15:05:10]1[Head office]Parameter setting successfully!
Click the button [Display default setting] to see the terminal’s default settings
4.1.8 Ring settings
Set the ring time. Please enable the Ring function in the parameter settings first of
all.
Click the button [Ring settings]. [Set ring time] window pops up as follows:
40
