manualshive.com logo in svg

Anviz DAC844, User Manual, Page: 39 / 50

Share
Download
Anviz DAC844 User Manual Download Page 39

AIM-DAC System 

 

 

39 

Anviz Global Inc 

 

 

And the “Multi Card Number” is “4”, that’s means need verify 4 users to pass the access control. 

 

In the “

Multi Card Group

” the “

Group1

” to “

Group 4

” as number “1”. That means the multi 

card verify users must come from “Group1” to “Group4”. 
And you can see the “Group2” to “Group4” have more than 1 users in the group. So you just 
need verify any one user in these groups. 

 
 
 
 

Click “

Add

” will make up all multi card informations store in the system database, and click 

“

Upload

” to upload all multi card informations to controller. 

 
Click “

Delete

” to delete “

Multi Card

” setting in the AIM-DAC system database. 

After modified the “

Multi Card

” setting in the AIM-DAC system, please click “

Modify

” to save 

the settings.   

 
 
 
 
 
 
 
 
 
 
 
 
 

Note:

 The Multi Card function must work with “Multi Card Group” setting and “Multi 

Card Number” must more than 1 users. 

Note:

 To clear the “Multi Card” functions in the controller. Please refer to 3.3.1 

Controller Operation – Clear. 

Summary of Contents for DAC844



















































Reviews:

No comments