MRT Models
43
Anthony Lifgtates, Inc.
800-482-0003
www.anthonyliftgates.com
7.2.4 Raise/Lower Flow Control Valve
Depending on several factors, such as oil viscosity
(thickness) and ambient temperature, the raise and/
or lower speed of the liftgate platform may need to be
adjusted.
1. To increase the lifting and lowering speed turn the
knob on valve counterclockwise.
2. To decrease the speed, turn the knob clockwise.
7.2.5 Adjusting Platform Speed
The platform should operate at recommended speeds
of 5 seconds to “open” and 5-7 seconds to “close” the
platform.
Adjust the platform speed through two needle valves on
top of the manifold (directly behind the cartridge valves).
1. Time the platform opening and closing speed.
2. Turn the adjustment knob in the back to control the
“opening” speed and the adjustment knob in the front
to control the “closing” speed of the platfrom.
3. Turn the appropriate adjustment knob “In” (clockwise)
to reduce and “Out” (counterclockwise) to increase
the speed of the platform.
C2
C1
C3
POWER DOWN, HI-FLOW, DUAL PUMP, 12VDC
MRT-1028c
OPEN
CLOSE
