Antaira Technologies - Industrial Ethernet Switches
LNX-0500-M12-67 Series User Manual V1.0
8
3. Mounting Installation
3.1 DIN-Rail Mounting
Follow the steps below to learn how to install the DIN-Rail on the industrial Ethernet switch and how
to hang the switch.
1.
Use the screws to install the DIN-Rail bracket on the rear side of the industrial Ethernet
switch as shown in
Figure 3.1
.
NOTE:
To remove the DIN-Rail bracket, do the opposite from step 1.
2.
After the DIN-Rail bracket is installed on the rear side of the switch, see
Figure 3.2
to mount
the switch.
.
1
:
Insert the top of the DIN-Rail onto the track.
.
2
:
Lightly pull down the bracket onto the rail.
.
3
:
Check if the bracket is mounted tightly on the rail.
Figure 3.1
