Antaira Technologies - Industrial Ethernet Switches
LNX-0500-M12-67 Series User Manual V1.0
6
Table 2.2
NOTE:
“+” and “-” signs represent the polarity of the wires that make up each wire pair.
Caution:
1. Please use with copper conductors only.
2. Use conductors with insulation rated for at least 60/75°C.
3. Base the conductor Ampacity on a maximum termination temperature of 60/75°C.
2.6 Wiring the Power Inputs
This industrial Ethernet switch provides dual DC power inputs for redundancy through a M12 5-
Pin A-Coded male connector. Prepare the M12 5-Pin A-Coded cable for power connection. Table
2.3 shows the pin assignment.
NOTE
: Recommended use the wire gauge between 18~24AWG.
Please follow the below steps to insert the power wire.
Table 2.3
