Antaira Technologies - Industrial Ethernet Switches
LNX-0500-M12-67 Series User Manual V1.0
11
4. Hardware Installation
4.1 Installation Steps
This section will explain how to install LNX-0500-M12-67 series.
Caution:
1.
This device is intended for indoor use and at altitudes up to 2000 meters. In
addition, the environmental condition should be maximum relative humidity
80% for temperatures up to 31°C decreasing linearly to 50% relative humidity
at 40°C.
2.
The device is intended to be installed in an industrial control enclosure and
panel.
3.
For use in a controlled environment, please refer to manual for environmental
conditions.
Installation Steps
1.
Unpack the industrial Ethernet switch from the original packing box.
2.
To hang the industrial Ethernet switch on a wall or DIN-Rail, please refer to the
Mounting
Installation
section.
3.
Power on the industrial Ethernet switch, then the power LED light will turn on.
a. If you need help on how to wire power, please refer to the
Wiring the Power Inputs
section.
b. Please refer to the
LED Indicators
section for LED light indication.
4.
Prepare the M12 cable for Ethernet connection.
5.
Insert one side of the M12 cable into the
switch’s Ethernet port and on the other side into
the networking device’s Ethernet port. The Ethernet port’s LED on the industrial Ethernet
switch will turn on when the cable is connected to the networking device.
a. Please refer to the
LED Indicators
section for LED light indication.
6.
When all connections are set and the LED lights all show normal, the installation is
complete.
