Antaira Technologies - Industrial Ethernet Switches
LMP-0800G-24 Series User Manual V1.0
73
5.19.2 Reboot
Users can click the “Apply” button under the “Reboot” interface to reboot the switch.
5.19.3 Default
Users can reset the switch to
“Factory Default” by clicking the “Apply” button under the default
interface.
5.20 Configuration
Under the “Configuration” section, users can save all the settings that have been configured,
backed up and stored to a local PC, Server, or a USB storage device through the built-in USB port.
Users can use the USB port feature to execute the “Auto Load” function to boot the switch’s
configuration that has been saved within the USB storage device, or users can utilize this function
to “Auto Load” the configuration to other switches, and those switches would require the same
configuration settings.
Users
can keep the USB storage device plugged in with the switch to enable the USB “Auto Backup”
function to allow the switch’s configuration settings to back up to the USB storage device whenever
users makes and save configuration settings.
Figure 5.99
– Switch Reboot Interface
Figure 5.100
– Reset Factory Default Interface
