Antaira Technologies - Industrial Ethernet Switches
LMP-0800G-24 Series User Manual V1.0
32
5.5.3.2 Scenario B
– Non-Configured Architecture
In some situations, users can choose not to configure the RPL owner and neighbor node. The
ERPS can still work well under the mechanism by blocking one of the ring ports in the ERPS
ring topology.
Shown above in
Figure 5.31
, the ERPS is blocked at one of the ring node ports. The blocked
port is chosen by an election mechanism that is decided by the MAC address. Due to the MAC
address is unique; the ERPS will just choose the biggest MAC as the blocking node.
However, the user is still required to enable the RRPS protocol, and assign a dedicated port
number for each uplink port under “Ring Port 0 and 1” but there is no requirement to setting the
role.
Figure 5.32
, below, shows the configurations as a reference.
Figure 5.31
– Non-Configured Architecture
Caution
:
Before enabling any ERPS protocols on any of the Ring Nodes, please DO
NOT connect all switches to form a loop (ring) network yet. There should
have at least one ring port leave unplugged until all nodes in the topology
are ready.