Antaira Technologies - Industrial Ethernet Switches
LMP-0800G-24 Series User Manual V1.0
35
5.6.2 RSTP Configuration
Users can enable/disable the RSTP function, and set the parameters for each port.
Terms
Value Description
Mode
Users can select RSTP or MSTP function to be enabled or
disabled before configuring the related parameters.
Root Priority (0~61440)
A value used to identify the root bridge. The bridge with
the lowest value has the highest priority and is selected as
the root. If any change of the value, the switch is
required to be reboot. The value must be multiple of
4096 according to the protocol standard rule.
Root Hello Time (1~10)
Enter a value between 1 through 10 for the time to control
the switch to send out the BPDU packet for RSTP current
status checking.
Root Forward Delay
(4~30)
Enter a value between 4 through 30 as the number of
seconds for a port to wait before changing from its RSTP
learning and listening states to the forwarding state.
Root Maximum Age
(6~40)
Enter a value between 6 through 40 as the number of
seconds a bridge waits without receiving STP
configuration messages before attempting a
reconfiguration.
Path Cost (0~200000000)
Enter a value from 1 through 200000000 to define the
Figure 5.34
– RSTP Configuration Interface
