Antaira Technologies - Industrial Ethernet Switches
LMP-0800G-24 Series User Manual V1.0
26
5.5.3 Before Configuring ERPS
Before configuring ERPS, the rapid spanning tree protocol (RSTP), or multiple spanning tree
protocol is required to disabled, due to only one protocol is exclusive running within a switch.
Below are the steps to disable RSTP, or MSTP.
Step 1:
Login the switch with a web browser.
Step 2:
Open
the “RSTP Configuration” page under the “Spanning Tree” manual shown
below in
Figure 5.24
.
Step 3:
When the RSTP/CIST Configuration page shows up,
set “Mode” to “Disable” as
shown in
Figure 5.25
.
Figure 5.24
– Spanning Tree Manual
Figure 5.25
– RSTP/CIST Configuration Interface
