36
condition the amount of errors at the data rate and fine tune to the best data rate it can
use.
Transmit Power
The maximum transmit power displayed is determined by the country code and
the maximum transmit power of the miniPCI that is being used.
*Note on changing channels:
When the operator changes the channels and if this new frequency have higher
power output permitted by regulation, the power previously selected low power level will
remains unchanged. You need to readjust the power level to in order to take advantage
higher output power available for the channel
.
Rate Aggressiveness
Allows user to reduce or increase transmit rate while still remain in Fully Auto
Algorithm. There are 2 scenarios that Rate Aggressiveness is useful. Environment might
be noisy at times. Lower the throughput will ensure better stability. Rate Aggressiveness
allows device to reduce the transmit rate, so range or power can be higher.
Choose a range of value from -3, -2, -1 Environment might be free of interference. But
the fully auto algorithm might give low throughput. Increase Rate Aggressiveness will
increase transmit rate in this case to get
higher throughput. Choose a range of value
from +3, +2, +1.
Station Parameters Settings
Fig 2.4 Basic Wireless Settings (Station/Station WDS)
This options below are only available in
Station, Station WDS
and
Repeater WDS
modes unless otherwise stated.
Wireless Mode:
Station
