19
Repeater WDS Mode
Repeater WDS Mode to mainly to extend the wireless range and coverage of the wireless
network allowing access and communications over places generally difficult for wireless
clients to connect to the network.
In Repeater mode, the access point acts as a relay for network signals on the network by
regenerating the signals it receives, and retransmitting them to main network
infrastructure.
Detailed information on the Repeater mode is available in the Repeater Setup section.
** Note:
Repeater WDS requires the access point to be setup in RootAP or
Access Point WDS mode to work.
Configure the IP Address
After setting up the hardware you need to assign an IP address to your PC so that it is in
the same subnet as the access point.
