10
Industrial Wireless Access Point
Hardware User's Manual
– AMS-2111
5. Check if the bracket is mounted tightly on the rail.
6. To remove the industrial wireless AP from the rail, do the opposite from the above steps.
3.2 Wall Mounting
Follow the steps below to mount the industrial wireless AP using the wall mounting bracket as shown
below in
Figure 3.4
.
Caution:
“Wall” means industrial control panel wall.
1. Remove the DIN-Rail bracket from the industrial wireless AP by loosening the screws.
2. Place the wall mounting brackets on the top and bottom of the industrial wireless AP.
3. Use the screws to screw the wall mounting bracket on the industrial wireless AP.
Caution:
The torque for tightening the screws on the device is 3.5 in-lbs.
4. Use the hook holes at the corners of the wall mounting bracket to hang the industrial wireless AP
on the wall.
5. To remove the wall mount bracket, do the opposite from the steps above.
Figure 3.4
Remove DIN-Rail Bracket
