9
Industrial Wireless Access Point
Hardware User's Manual
– AMS-2111
Follow the steps below to learn how to hang the industrial wireless AP.
1. Use the screws to install the DIN-Rail bracket on the rear side of the industrial wireless AP.
Caution:
The torque for tightening the screws on the device is 3.5 in-lbs.
2. To remove the DIN-Rail bracket, do the opposite from Step 1.
3. After the DIN-Rail bracket is installed on the rear side of the wireless AP, insert the top of the DIN-
Rail on to the track as shown below in
Figure 3.2
.
4. Lightly pull down the bracket onto the rail as shown below in
Figure 3.3
.
Figure 3.3
Secure on to the DIN-Rail
Figure 3.2
Insert on the DIN-Rail
