This manual is intended for use with ANSUL
®
Fire Suppressing/
Securing Systems.
Those who operate, recharge, inspect, or maintain these systems
should read this entire manual. Specific sections will be of particu-
lar interest, depending upon oneʼs responsibilities.
The AFFF (Aqueous Film-Forming Foam) System is designed
for use on Class A and Class B fires only. It must not be used
on Class C fires which involve energized electrical equip-
ment.
ELECTROCUTION HAZARD
Do not use AFFF extinguishing agent on Class “C” (electrical) fires
since AFFF is a conductor of electricity. Failure to comply will result
in severe personal injury or death.
Fire suppressing/securing systems are mechanical devices. They
need periodic care. Inspection, to provide reasonable assurance
that the fire suppressing/securing system is fully charged and
operable, will vary from hourly to monthly, based on the needs of
the situation. Inspections should always be conducted at regular
intervals. Maintenance, to provide maximum assurance that the
system will operate effectively and safely, should be conducted at
six-month intervals, or earlier, when indicated by an inspection.
The ANSULITE AFFF system must be protected from freezing!
NOTICE
Particular attention should be given to the Field
Inspection Manual (Part No. 31274) at the back
of this manual which deals with the testing pro-
cedures for the ANSULITE AFFF Concentrate.
Part Number: 63390-01
Date: 2012-MAR-22
Copyright © 2012 Tyco Fire Products LP. All rights reserved.
CAUTION
!
WARNING
