Anslut 416-108, User Instructions

Page: 188 / 214

EN
188
1� Take out the T/P valve from accessories�
2� Supply sealant tape on threads of T/P valve according to the industry standards�
3� Find the connector on the top of the tank according to the label, and install the valve onto it�
4� Connect the drainage pipe to the T/P valve as shown in the picture�
To drain
Automatic ventilating valve
The automatic ventilating valve is used to release gas that has collected in the water system�
Fit the automatic ventilating valve according to the instructions below�
1�
Unpack the automatic ventilating valve and adapter (3/4" to 1/2")
2� Fit the adapter (3/4" to 1/2") on the valve and tighten with a spanner�
3� Apply at least 4 turns of thread sealing tape clockwise on the thread�
4� Connect to the connection for the automatic ventilating valve on top of the unit�
– When the automatic ventilating valve is fitted in the correct position, release the small screw
cap over the valve so that gas can flow out�