Anritsu S331E User Manual Download Page 33 | Manualshive

Page: 33 / 126

background image

Instrument Overview

2-7 Connector Panel

Site Master User Guide

PN: 10580-00252 Rev. K

2-19

External Power

This is a 2.1 mm by 5.5 mm barrel connector, 12.5 to 15 VDC, < 4.0 A. The external power
connector is used to power the unit and for battery charging. A green blinking LED near the
Power button indicates that the instrument battery is being charged by the external charging
unit. The indicator is a steady green when the battery is fully charged.

“External Power On” on page 3-11

and

“Power-On Menu” on page 5-6

when

controlling the Site Master via external power.

USB Interface – Type A

The Site Master has two Type A USB connectors that accept USB Flash Memory devices for
storing measurements, setup data, and screen images.

Headset Jack

The headset jack provides audio output from the built-in AM/FM/SSB demodulator for testing
and troubleshooting wireless communication systems. The jack accepts a 2.5 mm 3-wire
miniature phone plug such as those commonly used with cellular telephones.

LAN Connection (Option 411)

The RJ-45 connector is used to connect the Site Master to a local area network or directly to a
PC with an Ethernet crossover cable. Integrated into this connector are two LEDs. The amber
LED shows the presence of a 10 Mbit/s LAN connection when on, and a 100 Mbit/s LAN
connection when off. The green LED flashes to show that LAN traffic is present. For more
information on the LAN connection, Ethernet connection, and DHCP, refer to

.

Optical SFP (Option 751)

The optical transceiver port is used to connect the instrument to the fiber optic CPRI link
between a Remote Radio Unit (RRU) and a Base Band Unit (BBU). The port is present only
on instruments with Option 751 installed. It accepts SFP modules that support line rates of
650 Mbps up to 9.83 Gbps. Refer to the instrument’s Technical Data Sheet for transceiver
part numbers and specifications.

RF Out (Reflection In)

RF output, 50

Ω

Type-N female connector, for reflection measurements. Maximum input is

+23 dBm at ±50 VDC.

Warning

When using the AC-DC Adapter, always use a three-wire power cable that is
connected to a three-wire power line outlet. If power is supplied without grounding
the equipment in this manner, then the user is at risk of receiving a severe or fatal
electric shock.

«
...
31
32
33
34
35
...
»

Summary of Contents for S331E































































































































Reviews:

No comments

Related manuals for S331E

Brand: AccuMASTER Pages: 2

Brand: Valeport Pages: 25

Brand: Banner Pages: 11

Brand: Bante Instruments Pages: 10

Brand: BANTE Pages: 11

Brand: Banner Pages: 14

Brand: Banner Pages: 16

Brand: XS Scuba Pages: 24

Brand: National Instruments Pages: 38

Brand: Fly Henry Pages: 5

WD-35606-00, WD-35606-05

Brand: Oakton Pages: 10

Brand: Fuji Electric Pages: 85

Brand: Laserworld Pages: 5

Brand: XS Instruments Pages: 41

Commissioner dali

Brand: Artistic License Pages: 26

Brand: T&D Pages: 31

Sonic-Pro S6A Series

Brand: Blue-White industries Pages: 2

Brand: FMT Swiss AG Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands