manualshive.com logo in svg

Anritsu S331E, User Manual, Page: 23 / 126

Share
Download
Anritsu S331E User Manual Download Page 23

Instrument Overview

2-4 Interface Screen

Site Master User Guide

PN: 10580-00252  Rev. K

2-9

Symbols and Indicators

The following symbols, icons, and indicators convey the instrument status or condition on the 
display. The colors shown here are in the standard or default display mode. 

Table 2-1.

Symbols and Icons

Symbol

Description

Green:

Battery is 30% to 100% charged.

Yellow:

Battery is 10% to 30% charged.

Red:

Battery is 0% to 10% charged.

Green with Black Plug body:

Battery is fully charged and 

external power is applied.

Lightning Bolt:

Battery is being charged (any color symbol).

Red Plug body:

External power is applied, and no battery is 

installed, or battery has lost communications with the instrument.

Storage Icon:

Tap the floppy disk icon to display the Save screen 

and menu.

Camera Icon:

Saves a JPEG image of the current screen display

.

Shift Key Icon:

This icon is displayed between the battery symbol 

and the submenu keys after the Shift key has been pressed, and 
until another key is pressed.

GPS Icon:

This icon is displayed right after the date and time 

when GPS is available. Refer to 

Chapter 6, “GPS (Option 31) ”

 for 

details.

Power Button with Power LED and Charge LED:

This is a 

physical button with LED indicators. It is located near the numeric 
keypad.

Shift

Summary of Contents for S331E































































































































Reviews:

No comments