Anritsu BTS Master MT8221B User Manual Download

Page: 64 / 362

4-4 File Menu

File Management

4-10

PN: 10580-00207 Rev. E

BTS Master UG

Recall Menu

Key Sequence:

File

Recall

This menu and dialog box is used to create folders and select where the
BTS Master will save the current file. Select folders or drives with the

Up/Down

keys or the rotary knob.

Sort By:

Press this submenu key to sort file and folders by the file name,

by the type of file, or by the date that the file or folder was saved.

Sort Order:

Displays the folder or file in ascending or descending order

based on the selection in the Sort By key.

File Type:

Press this submenu key to select what type of file is viewed. The

options are the ALL, Measurement, or Setup. The file type can be changed
with the

Up/Down

keys or the rotary knob. Press

Enter

to make the

selection.

Setup:

Setup files contain basic instrument information,

measurement mode setup details, measurement marker data, and
limit data.

Measurement:

Measurement files contain all of the information in

the setup files and the measurement data.

Limit Lines (.lim):

The Limit line file contains limit line data details.

ALL:

Displays all file types.

Refresh Directories:

Press this key to update the display.

Figure 4-10.

Recall Menu

Sort By

Name Date Type

Sort Order

Asc Desc

File Type

ALL

Refresh

Directories

Recall

Summary of Contents for BTS Master MT8221B











































































































































































































































































































































































Search results

Summary of Contents for BTS Master MT8221B

Reviews:

Related manuals for BTS Master MT8221B

Brands by name

Popular brands

Anritsu BTS Master MT8221B, User Manual

Search results

Summary of Contents for BTS Master MT8221B

Reviews:

Related manuals for BTS Master MT8221B

Brands by name

Popular brands