Anova TC102, Instruction And User'S Manual

Page: 8 / 30

8
2.2 IDENTIFICATION OF MAIN COMPONENTS
1. Grass catcher
2. Grass discharge tube
3. Driving seat
4. Front steering wheel
5. Light switch
6. Blade activation switch
7. Engine switch
8. Reverse pedal
9. forward pedal
10. Cutting height adjustment lever
11. Collection bag turning lever
12. Engine throttle
13. Rear wheel
14. Cutting deck
15. Brake pedal
16. Brake lock / parking brake
17. Front wheel
3. ASSEMBLY
For storage and transportation purposes, some machine components are not factory installed and must
be assembled after unpacking. Follow the instructions below.
IMPORTANT The machine is supplied without engine oil or fuel. Before starting the engine, fill it
with proper oil and fuel. Consult your sales center.
3.1 UNPACKING When unpacking the machine, be careful to gather all individual parts and
accessories, and do not damage the mower deck when removing the machine from the deck.
Remove the 6 bolts at the bottom of the packing shelf at first, then
you can lift the top frame to release the machine (the operation
will be done by two people). And cut the fixed wire at the front and
rear of the tractor frame, then remove the machine from the
platform. (Fig.1
）
The packaging contains ( ☛ fig.2)
1. The machine2. The grass catcher cover board3. steering wheel
4. The seat
5. Side retention tube
6. The grass catcher
7. Front bracket
8. An envelope containing:- the instruction manual and
documents- nuts and bolts
- ignition keys - tools
NOTE To avoid damage to the mower deck, set the mower deck
to its maximum height on the machine and use extreme care
when removing the machine from the deck.