background image

 

7) Disable the cutting system before crossing surfaces other than grass. 

 

8) Never use the machine with the guards/covers damaged, or without the guard in place. 

 

9) Do not change engine control settings or exceed engine speed (rpm). Running the engine at 

excessive speed can increase the risk of personal injury. 

 

10) Before leaving the driver's seat:- deactivate the blades and lower the accessories;- place the 

machine in neutral gear and apply the parking brake;- stop the engine and remove the ignition key. 

 

11) Deactivate the blades, stop the engine and remove the ignition key:- before cleaning blockages in 

the grass outlet or unclogging the collector channel;- before cleaning, checking or repairing the 

machine;- after hitting an object weird. Inspect the machine for damage and make all repairs before 

restarting and using the machine again - if the machine starts to vibrate abnormally (check the causes 

immediately). 

 

12) Deactivate the blades and cutting system for transport or when not in use. 

 

13) Stop the engine and deactivate the blades:- before refueling;- before removing the grass catcher. 

 

14) Reduce throttle when starting engine. If the engine is equipped with a fuel cock, turn off the fuel 

cock when you have finished mowing. 

 

MAINTENANCE AND STORAGE

 

 

1) Keep all nuts, bolts and screws tight to ensure the equipment works properly and safely. 

 

2) Never store the equipment with gasoline in the tank inside a building where fumes emanate. It may 

be hit by an open flame or spark and cause a fire. 

 

3) Allow the motor to cool down before storing it in any box or packaging. 

 

4) To reduce the risk of fire, keep the engine, exhaust, battery compartment, and gasoline storage area 

free of grass, leaves, or excessive grease. 

 

5) Check grass catcher frequently for wear or damage. 

 

6) Replace worn or damaged parts for safety reasons. 

 

7) If the fuel tank has to be drained, this should be done outdoors and in a clear area. 

 

8) On multi-blade machines, remember that the rotation of one blade can cause others to rotate at the 

same time. 

 

9) When the machine is stored or left unattended, lower the mower deck to the ground. 

 

SECURITY LABELS

 

 

Your machine must be used with care. This is why picture labels have been 

placed on the machine, to remind you of the main precautions to be taken while working and handling 

the machine. These labels must be considered an integral part of the machine and must be replaced if 

damaged. If a label becomes detached or illegible, contact your dealer for a replacement. Its meaning 

is explained below. 

 

1. 

Warning: Please read the instructions before using this machine. 

2. Warning: Turn off the ignition key and read the instructions before carrying out any repair or 

maintenance work. 

Danger! Ejected Objects: Do not use without stone guard or grass catcher in place. 

Summary of Contents for TC102































Reviews: