Anova TC102, Instruction And User'S Manual

Page: 12 / 30

5
4. CONTROLS AND ACCESSORIES
4.1 STEERING WHEELTurns the front wheels and allows you to steer the machine while working.
4.2 THROTTLE
Regulates the motor the number of rpm and the forward speed. The positions are indicated on a plate
showing the following symbols:
"CHOKE" cold start
"SLOW" for minimum engine speed
"FAST" for maximum engine speed
- The «CHOKE» position enriches the mixture, so it should only be used for as long as necessary when
starting the machine cold.- When moving from one area to another, place the lever in a position
between «SLOW» and «FAST ».- When cutting, switch to «FAST» to give full motor power to the
cutting system.
4.3 ACTIVATION OF THE CUTTING SYSTEM AND BRAKE CONTROLThe switch allows you to
engage the blades using the electromagnetic clutch:
O «A» Pressed = Leaves unhooked
I «B» Pulled = Hooked Sheets
If you activate the blades without taking the necessary safety precautions, the
engine will shut down.
4.4 LIGHT SWITCH (Fig1)
To turn on the headlights, turn the key to the «ON» position.
IMPORTANT The light on the mower is for supplemental lighting only. Only use the mower in
broad daylight.