Anova TC102, Instruction And User'S Manual

Page: 21 / 30

14
6. MAINTENANCE
6.1 SAFETY RECOMMENDATIONS
CAVEAT Before cleaning or maintenance work, remove the ignition key and read the
instructions. Wear proper clothing and work gloves when your hands are at risk.
CAVEAT Never use the machine with worn or damaged parts. Defective or worn parts should always
be replaced and not repaired. Use only original replacement parts: parts that are not of the
same quality can damage the equipment and affect your safety and the safety of others.
IMPORTANT Never dispose of used oil, fuel, batteries or other contaminants in unauthorized
places!
6.2. MAINTENANCE PROGRAM
task to perform Hours Accomplished
1. machine
1.1. Check tightness/sharpness of blades 25
1.2. replace blades 100
1.3. Check drive belt 25
1.4. Replace drive belt 2) --
1.5. Check belt cutting system 25
1.6. Replace cutting system belt 2) --
1.7. Transmission Adjustment Check 10
1.8. Brake system check 10
1.9 Check screws (looseness) 25
1.10. Lubrication 3) 25
2. Engine
2.1. Oil change --
2.2. Filter cleaning and/or checking --
23. Oil filter replacement --
2.4. Fuel filter check --
2.5. Fuel filter replacement --
2.6. Spark plug check and cleaning --
2.7. Spark plug replacement --
See the engine manual for the complete list of maintenance and their frequency. When the first signs of
wear appear, contact your dealer to replace the part. A general lubrication of all joints should also be
carried out whenever the machine is not used for a long period of time.
The table above is to help you maintain the safety and performance of your machine. Shows the main
maintenance and lubrication operations and their frequency. To the right of each item, there is a box
where you can write the date or after how many hours of operation the work was performed.
CAVEAT All checks, adjustments and replacements that are not described in chapters 6.3 and 6.4 of
this manual must be carried out by your dealer or a specialized Service Center. Both have the
necessary knowledge and tools to ensure the job is done correctly without compromising the safety of
the machine.
6.2.1 Summary of the main situations in which the service
operation may be required
When you need ...Blades vibrate -- Contact your dealer
Blades rip grass and grass turns yellow -- Contact your
dealer Cut is uneven -- Align mower deck ( ☛ 6.3.1)Blades
activate abnormally -- Contact your dealer. Machine does
not brake -- Contact your dealer Forward motion is erratic --
Contact your dealer.
6.2.2 Engine