2
LEVEL VERIFICATION AND OIL FILLING
- The verification, as well as the oil filling, will be carried out with the group located on a
horizontal surface.
- Remove the oil filler cap and clean the dipstick.
- Insert the dipstick into the unscrewed oil filler neck.
- Remove it and check the level indicated on the dipstick. If the level is too low, fill
the reservoir to the top of the oil filler neck with recommended oil (SAE10W-30).
Taking into account the temperatures of the work area, you can consult the table
below to consult the most appropriate grade of oil. If you have any questions, check with your
sales center.
FILLING THE FUEL TANK
- Clean the contour of the tank filler neck.
- Check the fuel level on the gauge and, if necessary, fill up with the recommended fuel.
- Check the engine fuel level before each start.
- Use only approved fuel.
- Do not start the engine when it contains insufficient fuel.
Never use dirty fuel / oil mixture or fuel. The use of unauthorized fuel alternatives to the
recommended one is not recommended.
AIR FILTER
- Check the cleanliness of the air filter of the machine regularly.
- Remove the air filter cover and check that the filter is in good
condition and completely clean. If you notice damage, replace
it immediately.
- If there is too much dirt, clean it with compressed air and
immerse it in a cleaning solvent, let it dry and add a few drops
of engine oil. Squeeze out excess oil and return the filter to its
original location.
STARTING BATTERY (optional)
- Check the charge status regularly, at least 1 time every 6 months. On sealed-type batteries,
recharge with an appropriate battery charger or replace it if the charge is not adequate.
Filter grip
Air filter
Air filter cover
Filter grip
