background image

13 

 

10.

 

CE

 

DECLARATION

 

OF

 

CONFORMITY 

 

 

 

 

DISTRIBUTION COMPANY  

 

MILLASUR, SL 

RUA EDUARDO PONDAL, Nº 23 PISIGÜEIRO  

15688 OROSO - A CORUÑA 

SPAIN 

 

 

CE DECLARATION OF CONFORMITY 

 

 

In compliance with the different CE directives, it is hereby confirmed that, due to its 

design and construction, and according to the CE mark printed by the manufacturer on it, the 

machine identified in this document complies with the relevant and fundamental requirements 

in safety and health. of the aforementioned CE directives. This declaration validates the 

product to display the CE symbol. 

 

In the event that the machine is modified and this modification is not approved by the 

manufacturer and communicated to the distributor, this declaration will lose its value and 

validity.  

 

Machine name: GENERATOR

 

 

 

Model: 

GC5500TFE/GC7000TFE 

 

Recognized and approved standard to which it conforms: 

 

 

Directive 2006/42 / EC 

  

 

 

 

 

  

Tested according to the standards:  

 

EN ISO 8528-13: 2016 EN 60204-1: 2006 / A1: 2009 

IEC 60201-1

 

 

Test report no: 70.403.06.263.03-07 

 

Protection level: IP23M 

Noise level dB (A): 98Db (A) 

 

 

 

 

 

 

 

 

Company seal 

01/07/2019 

Summary of Contents for GC500TFE



















Reviews: