Anolis MiniMe, User Manual

Page: 31 / 41

3
10. Maintenance and cleaning
DANGER !
Disconnect from the mains before starting any
maintenance work
A soft lint-free cloth moistened with any good glass cleaning fluid is recommended for objective lens, under no
circumstances should alcohol or solvents be used!
Never use alcohol or solvents for cleaning lenses in the moving head!
Use wet cloth only.
It is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid residues must not build
up on or within the fixture. Otherwise, the fixture‘s light-output will be significantly reduced. Regular cleaning will
not only ensure the maximum light-output, but will also allow the fixture to function reliably throughout its life.
The front lens may require monthly cleaning as smoke-fluid tends to building up residues, reducing the light-
output very quickly. The cooling fans should be cleaned according to the situation (at least annually).
The interior of the base should be cleaned at least annually using a vacuum-cleaner or an air-jet.
More complicated maintenance and service operations are only to be carried out by authorized distributors.
Important! Check the air filter periodically and clean before it become
clogged!
Clean the air filter placed in the rear side of the fixture head . Use a vacuum cleaner, compressed air or you
can wash them and put back dry.
After replacing the air filters, reset the elapsed time counter in the menu "Information" (Info--->Air Fil--->Ela
T).
10.1 Replacing a fuse
This replacement has to be realized by a qualified person or Anolis service worker only.
Specifications are subject to change without notice.
May 15, 2014
1- fastening screws
2- rear cover of the head
3- Air filter
4- Velcro fastener