Anolis MiniMe, User Manual

Page: 20 / 41

0
LED Engi - Led engine options . Enter the menu if you want to set special options for LED engine.
Ceil P - Ceiling projection . When this function is "On", the picture is top (bottom and left)
right reversed.
This function enables to project the image from a ceiling mounting of the MiniMe.
Rear P
-
Rear projection
. When this function is "On", the picture is left (right) reversed.
This function enables to project the image to a rear projection screen.
GRP Engi
-
Graphic engine options
. Enter the menu if you want to set special options for graphic engine.
Aspect R
-
Keeping Aspect ratio
. If this function is "On", the fixture keeps native
aspect ratio of played pictures (videos).
If this function is "Off", all pictures (videos) are played in the aspect ration 16:10 regardless
of native aspect ratio of each picture (video).
Gobo Sel Mode - Gobo selection mode . The media files assigned to the DMX values can
be sorted either in alphabetical ( item ABCD) or numerical order (item Numer).
Default assigning is the alphabetical order.
SS Gobo Swap T - Slide Show gobo swap time . The option sets time period during which
a gobo stay in a position before changing at the "Gobos presentation" function (channel 17/
Digital gobo wheel/ DMX range of 251-252).
Fans - Fan mode . Use the menu to set the fixture fans to max. fan power mode ("High") or to the auto-control
mode ("Auto").
Defaults - The menu item allows to set all fixture parameters to the default (factory) values.
5.4 Manual Control (Manual)
DMX Ctrl
-
DMX channels control
. Use the menu to manually control each channel effect.
LED Engi
-
LED Engine options
Ext Inp
- Via this menu option is possible to activate the external input (HDMI).
Keystone - The item allows to use LED engine keystoning when the external input is active.
Led On/Off - The item allows to switch off LED engine when the external input is active.
5.5 Stand-alone (St Alone)
Auto Run - Presetting playback . This function allows you to select the program which will be played in the
stand-alone mode after switching the fixture on. Selected program will be played continuously in a loop.
PL DMX Prg
-
Play DMX program
. Select this menu to run one of 9 programs which have been recorded via
the menu “Rc DMX Prg”. When the program is running, pressing the [ENTER] pauses its running.
Rc DMX Prg
-
Record DMX program
. The menu allows you to record DMX data that receives the fixture and
then replay them again via the menu “PL. DMX Prg”. There is a menu of 9 programs which can be used for
recording DMX data.
Select desired program and press the [ENTER] to start recording. To stop recording, press the [ENTER]
again.
Recorded programs ca be copied to the USB memory stick (menu "User Media") and after that loaded into
another fixture (s).
5.6 Reset (Reset)
This option enables to index all effects and return them to their standard positions.
Reset GE
- reset of the graphic engine module.
Reset P/T
- reset of the pan/tilt module.
Reset Focu
- reset of the focus module.
Reset All - reset of all fixture modules.