0
3.4 Using the mounting bracket
The mounting bracket allows simple mounting of the Robin MiniMe on the ceiling. The mounting bracket is
intended for horizontal mounting only.
IMPORTANT! Ceiling mounting requires extensive experience, including calculating
working load limits and installation material being used.
To fasten the Robin MiniMe on the ceiling via the mounting bracket, follow these steps:
1
. Fasten the mounting bracket (1) on the ceiling (2) by means of the four screws (3). Check, that the stabiliza
-
tion screw (4) is screwed into mounting bracket.
Note The screws are not supplied with the mounting bracket, their length, diameter and a type of screws de
-
pends on conditions of given installation.
2
. Insert a pivot (5) into the mounting point in the fixture base (6) and turn it a full 1/4-turn clockwise to lock.
Instal the second pivot.
3
. Insert the fixture with both pivots (5) into circular slots under securing blades (8) and than move the fixture
towards the stabilization screw (4) until the pivots (5) reach the rectangular slots (7) and both securing blades
(8) snap into groove in the pivots.
4.
Check the fastening of the fixture.
Summary of Contents for MiniMe
Page 1: ...Version 1 6...
Page 28: ...28 Dimensions mm Mounting bracket optional...
Page 30: ...30...
