ArcSource 96 Integral (RGBW)
6
Ensure that the structure to which you are attaching
the fixture is secure
Caution:
Overhead installation requires extensive experience. Fixtures may cause severe injuries when crashing
down! If you have doubts concerning the safety of a possible installation, do not install the device and consult
installation with an expert.
The fixture can also stand directly on a flat surface by means of the removable stand:
For overhead placing you must use safety rope with screw-on carbine. Pull the safety-rope through the mounting
bracket and over the trussing system etc. Insert the end in the carbine and tighten the fixation screw.
3.2 Installation of the barn-doors
You can install the barn-doors module to better define illuminated surface. .
1.
Disconnect the fixture from the mains.
2.
Screw the barn-doors module (2) on fixture using four M5x14 screws (1) and washers (3) as shown on the
picture below.
Summary of Contents for ArcSource 96 Integral
Page 1: ...Version 1 6...
Page 28: ...ArcSource 96 Integral RGBW 28...
