ArcSource 96 Integral (RGBW)
19
7.
Use the UP/DOWN buttons to select next channel and press the ENTER button.
8.
After having set all channels in the current program step, press the MODE button to go by one menu level
back and select another program step.
6.7 Special functions
rdML
---
Code
.This menu item shows the first part of the RDM identification code.
rdMH
---
Code
. This menu item shows the second part of the RDM identification code.
rAdI
---
Wireless DMX.
The menu serves for reading of the wireless operation status (only for Wireles DMX
version).
r.InF.
---
Wireless DMX information.
The menu item shows level of received signal in %. If the fixture is not
linked to the transmitter, “
no.LI
” is displayed.
r.UnL.
---
Wireless DMX unlink.
The item serves for unlinking the fixture from transmitter.
AdJ
---
Effect Adjustment.
The menu allows calibration of each LEDs array.
dMH
---
DMX Values.
The menu item enables to control all LEDs before calibrating each LEDs array.
CAL.U
---
Calibrating unit.
The menu serves for fine current calibration of LEDs during fixture burn-in at
a factory. Users should not change the setting.
uPd.M.
---
Updating mode
. The menu item allows you to update software in the fixture via either serial or USB port
of PC.
The following are required in order to update software:
- PC running Windows 95/98/2000/XP or Linux
- DMX Software Uploader
- Flash cable RS232/DMX No.13050624 (if you want to use a serial port of PC)
- Robe Universal Interface (if you want to use an USB port of PC)
Note1: Software update should execute a qualified person. If you lack qualification, do not attempt the update
yourself and ask for help your ROBE distributor.
Note 2: DMX address, programs 1-3 and all items in the menu "PErS" will be set to their default values.
To update software in the fixture:
I
. Installation of the DMX Software Uploader.
1.
DMX Software Uploader program is available from theAnolis web site at WWW.anolis.cz.
2
. Make a new directory ( e.g. Anolis_Uploader) on your hard disk and download the software into it.
3
. Unpack the program from the archive.
II.
Fixture software updating.
1.
Determine which of your port is available on your PC and connect it:
-
with the DMX input of the fixture if you using the flash cable RS232/DMX
-
with the DMX input of the Robe Universal Interface if you using the USB cable.
Disconnect the fixture from the other fixtures in a DMX chain. Turn both the computer and the fixture on.
Make sure the lamp is switched off (only if the fixture involves a lamp).
2.
Switch the fixture to the updating mode:
1
Use the UP/DOWN buttons to find “
SPEC.
“ menu.
2
Press the ENTER button.
3
Use the UP/DOWN buttons to select “
uPd.
“ item.
Summary of Contents for ArcSource 96 Integral
Page 1: ...Version 1 6...
Page 28: ...ArcSource 96 Integral RGBW 28...
