12
Default IP Address
- Preset IP address, you can change only first byte of IP address
(2 or 10) e.g.
002
.XXX.XXX.XXX or
010
.XXX.XXX.XXX.
Custom IP Address
- The option enables to set up all bytes of IP address.
Net Mask
- The option enables to set up all bytes of Net Mask.
ArtNet Universe
- Use this item to set a Universe (0-255). The Universe is a single DMX
512 frame of 512 channels.
MaNet session ID
- Use this item to set a MAnet session ID (1-32).
MANet I/2 Universe
- Use this item to set a Universe (1-256).
sACN Universe
- Use this item to set a Universe (1-32000)
.
sACN Priority
- The value of this item can be set in range of 0-255.
System config
--- The menu allows to change DMX Offset of desired pixel zone (the red background of offsets
cautions that the number is wrong). Use + and - icons to select zone.
Setup Assistant
--- The menu allows to change DMX Offset of selected pixel zone. Use + and - icons to set
offset and . to select next zone.
Linear/Exponential
--- This menu item allows you to choose desired dimmer running. Selected dimmer curve
can influence local and global dimmer (option Dimmer) or colours (option Channels).
Fade Time
--- The menu item allows to set fade time from 0 sec. to 25.5 sec. This time influences response
on coming DMX value (e.g. dimmer is set at 20 DMX, coming DMX value is 255 and the Fade Time=10 sec.
The light intensity will go from 20 DMX to 255 DMX during 10 seconds continuously without a jump).
ArcZone Pixel
--- This menu allows to set all connected Pixel zones (not for LED zones).
Commands
Search Pix
- this function checks all pixel modules connected to
the PIXEL Zones.
Sort Pix
- c
onected pixel modules are sorted by
the following rule:
ArcPix modules are sorted according to their IDs.
ArcDot modules are sorted according to their distances from
the PIXEL Zone (the active terminator for the ArcDot has
to be connected to the last ArcDot at each PIXEL Zone).
Save
- this option saves information found in during running options
"Search Pix" and "Sort Pix".
Test -
use this menu item to check if all pixel modules light in pre-defined colours.
Test Single
- pixels light one by one.
Test All
- all pixels light at the same time.
Stop Test
- the item finishes a test procedure.
Fade Time For Pix -
the menu allows to set fade time for all pixel modules.
As Global
- fade time is taken from global fade time set in the menu
item "Fade Time" (menu Configuration)
Separate
- allows to set fade time (0-25,5sec.) independently on
the global fade time.
3/4ch Mode -
the menu offers 3-channel (RGB) or 4-channel (RGBW) mode for
pixel control.
Summary of Contents for ArcPower Rack Unit Pixel CE: ArcPower Rack Unit Pixel US
Page 1: ...version 1 7...
